落球回弹试验仪,介电击穿强度测定仪

ASTMD495耐高压低电流电弧放电试验机

ASTMD495耐高压低电流电弧放电试验机

日期:2025-11-16 03:15
浏览次数:2194
摘要:
ASTMD495耐高压低电流电弧放电试验机

高电压降小直流电实验设计仪(耐弧光实验设计仪)-(计算机网络控住)

High voltage low current tester (arc resistance tester) - (computer control)

货商品名稱称:耐电弧试验机

Product name: electric arc resistance tester

产品的规格:NDH-A

Product model: NDH - A

考虑标准的:GB/T 1411-2002《固体颗粒绝缘电阻材料耐高压得过低电压电孤充放的测试》(共同IEC  61621-1997)及ASTM D495等标淮的需要来设计生产制造的,并完全符合IEC 149、UL 746A等可靠性试验方式方法

Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc

一 概述

一An overview of the

最主要不适用依据及功能性:

本耐压机是明确应用作无刷电机、电气和家居工厂用电气等服务业的焊工用塑胶、树脂胶胶胶和隔绝漆等隔绝的原的原材料的耐弧光使用效果评判,主用作液体隔绝的原的原材料如:塑胶、透明膜、树脂胶胶、云母片、陶瓷图片、钢化玻璃、隔绝油、隔绝漆、纸箱等材质的耐弧光使用效果检测;

本试验装置机由计算公式机控制运作,不错展示目前科学试验报告状态下及科学试验报告时间间隔,科学试验报告结尾后并另存目前科学试验报告数据表格,并可彩打.的标准实验室统计。

Main scope of application and features:

This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;

This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report 

二 功能特点

1 滤油机为左右一身的结构,顶部为运行设备,顶部为实验设计箱。

2 本产品设备采用了*新智力把控好的技术,依据选软件程序(IEC或ASTM)可全自动来进行检验,并在pc上表现试验报告流程和然而。

3 **性能参数保持良好,抗影响实力强,测试软件精度等级高。

二:Functional features:

1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.

2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.

3 good safety performance, strong anti-interference ability, high test precision. 

三 主要技术参数

1 电弧放电通断时间间隔粗差:高于 ±10ms

2 调压器存储量:2kVA

3 额定值试验报告直流电压:12.5kV

4 试验台额定电压控制精度:±3%

5 功率掌握误差:±10%  直流电压校正误差:1.5%

6 电极片对坯料心理压力:(0.5±0.05)N

7 电级相关材料:钨棒

8 电极材料差距:(6.35±0.1)mm(IEC)

               (6.0±0.1)mm(ASTM)

9 实用环镜摄氏度:(23±2)℃

10 在使用生活环境室内湿度:(50±5)%

11 电源模块:220V±5%  50Hz  10A

12 测试    的方式:   标准/美标/10 mA 不断/20 mA 间隔/30 mA重复/40 mA间断

13 检测软件如下所示:

执行程序段

脉冲感应电流

mA

电孤通断时长s

各软件段继续时刻s

现场实验总日期s

 

 

IEC 61621

ASTM D495

 

 

1

10

1/8s通 7/8s断

1/4s通 7/4s断

60

60

2

10

1/4s通 3/4s断

1/4s通 3/4s断

60

120

3

10

1/4s通 1/4s断

1/4s通 1/4s断

60

180

4

10

连继通

60

240

5

20

不断通

60

300

6

30

间隔通

60

360

7

40

连着通

60

420

Three main technical parameters:

Error: 1 arc on-off time less than plus or minus 10 ms

Transformer capacity: 2 kva

3 test voltage rating: 12.5 kV

4: test voltage accuracy + / - 3%

5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%

6 electrode pressure on sample: (0.5 + 0.5) N

7 electrode materials: tungsten rods

8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)

9 using the environment temperature (23 + 2) ℃

10 use environment humidity: (50 + 5) %

Power supply: 220 v + 5% for 50 hz 10 a

Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous

13 test procedure is as follows:

Procedures section of the arc current

MA arc on-off time s the program s test total duration time s

IEC 61621 ASTM D495

1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s

2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s

3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s

4 consecutive 10 to 60, 240

5 20 consecutive 60, 300

30 consecutive 6 to 60, 360

7 consecutive 40 to 60, 420 

四  配置

项目编号

品牌

数

自己的名字

01

耐弧光测试英文仪

单台

 

02

探针系统软件

做一套

 

03

金属电极支承

一款

 

04

主机电源电线

一整套

 

05

与地面放**

一枝

 

06

感应电流毫安表

两台

 

07

手机测控手机软件

每套

 

08

样品架

一枝

 

09

电极材料长距离要求块

2块

 

10

多角度规则块

2块

 

11

瓷砖片

2片

 

12

喷墨打印文件机

1台

产品品牌

13

统计机

1台

产品品牌

14

的使用介绍书

1份

 

15

合适证

1份

 

 

Four configuration:

Serial number name number note

01 arc resistance tester

02 a electrode system

03 electrode bearing a set

04 a set of power cable

05 ground put a rod

06 milliammeter current one

7 a set of computer measurement and control software

08 specimen holder a

09 electrode distance standard 2 blocks

Standard 2 blocks of 10 Angle

11 ceramic pieces 2 pieces

12 one brand inkjet printer

13 1 computer brand

14 1 instruction manual

15 1 certificate

五 软件型号:

NDH-A    耐脉冲可靠性试验仪-微机掌控

NDH-B    耐脉冲现场实验仪-接触屏管理

Five product model:

NDH - A arc resistance tester - microcomputer control

NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询!

落球回弹试验仪,介电击穿强度测定仪 落球回弹试验仪,介电击穿强度测定仪 落球回弹试验仪,介电击穿强度测定仪 落球回弹试验仪,介电击穿强度测定仪 落球回弹试验仪,介电击穿强度测定仪