- 电压击穿试验仪
- 介电常数
-
电阻率测试仪
-
落球回弹试验仪,介电击穿强度测定仪:新-高温电阻率测试仪
-
落球回弹试验仪,介电击穿强度测定仪:高温绝缘电阻率测试仪
-
落球回弹试验仪,介电击穿强度测定仪:石墨电极电阻率测试仪
-
落球回弹试验仪,介电击穿强度测定仪:210-炭块电阻率测试仪
-
121T-高温电阻率测试...
-
落球回弹试验仪,介电击穿强度测定仪:多功能极片电阻测量系统
-
落球回弹试验仪,介电击穿强度测定仪:121A-绝缘电阻率测试...
-
点对点对地电组率测试仪
-
油介质损耗电阻率测试仪
-
落球回弹试验仪,介电击穿强度测定仪:121A1-热刺激电流测...
-
121B-全自动电阻率测...
-
落球回弹试验仪,介电击穿强度测定仪:高低温绝缘电阻率测量系统
-
121-体积表面电阻率测...
-
落球回弹试验仪,介电击穿强度测定仪:新-高温电阻率测试仪
- 粉末电阻率测试仪
- 导体、半导体电阻率
- 耐电弧测试仪
- 漏电起痕试验仪
- 电池隔膜电弱点测试仪
- 橡胶塑料检测仪器
-
力学性能检测仪器
-
落球回弹试验仪,介电击穿强度测定仪:5KN-电子万能试验机
-
落球回弹试验仪,介电击穿强度测定仪:20KN-电子万能试验机
-
落球回弹试验仪,介电击穿强度测定仪:100KN-电子万能试验...
-
落球回弹试验仪,介电击穿强度测定仪:CLC-AI-落锤冲击试...
-
落球回弹试验仪,介电击穿强度测定仪:端子电流循环寿命试验机
-
落球回弹试验仪,介电击穿强度测定仪:组合式摆锤式冲击试验机
-
落球回弹试验仪,介电击穿强度测定仪:新CLC-AI-落锤冲击...
-
落球回弹试验仪,介电击穿强度测定仪:AII-汽车胶粘剂冲击试...
-
落球回弹试验仪,介电击穿强度测定仪:1500-防腐涂层冲击试...
-
落球回弹试验仪,介电击穿强度测定仪:CBC系列-摆锤式冲击试...
-
落球回弹试验仪,介电击穿强度测定仪:5KN-电子万能试验机
-
落球回弹试验仪,介电击穿强度测定仪:海绵泡沫材料检测仪器
-
泡沫起升仪
-
新-泡沫分析仪
-
海绵泡沫切割机
-
织物透气率测试仪
-
落球回弹试验仪,介电击穿强度测定仪:海绵压缩变形试验箱
-
落球回弹试验仪,介电击穿强度测定仪:海绵压缩变形试验机
-
落球回弹试验仪,介电击穿强度测定仪:海绵落球回弹试验仪
-
海绵泡沫密度测试仪
-
海绵压陷硬度测试仪
-
海绵压缩蠕变测试仪
-
落球回弹试验仪,介电击穿强度测定仪:海绵空气透气率测试仪
-
落球回弹试验仪,介电击穿强度测定仪:海绵往复冲击疲劳试验机
-
落球回弹试验仪,介电击穿强度测定仪:海绵泡沫缓冲能量试验机
-
2000-海绵拉伸撕裂试...
-
1000-海绵拉伸撕裂试...
-
落球回弹试验仪,介电击穿强度测定仪:慢回弹泡沫复原时间测试仪
-
落球回弹试验仪,介电击穿强度测定仪:新-慢回弹泡沫复原时间测...
-
泡沫起升仪
- 受电弓/碳滑板检测仪器
- 落球回弹试验仪,介电击穿强度测定仪:材料热物理性能实验设备
- 热物性检测仪器
-
粉末测试设备
-
霍尔流速计
-
真密度测试仪
-
斯柯特容量计
-
休止角测定仪
-
粉末压实密度仪
-
振实密度测试仪
-
颗粒图像分析仪
-
全自动真密度仪
-
塑料流动性测定仪
-
粉尘安息角测试仪
-
落球回弹试验仪,介电击穿强度测定仪:多功能压力测量系统
-
落球回弹试验仪,介电击穿强度测定仪:粉末自然堆积密度仪
-
落球回弹试验仪,介电击穿强度测定仪:粉体综合物性测试仪
-
落球回弹试验仪,介电击穿强度测定仪:氧化铝流动角测定仪
-
落球回弹试验仪,介电击穿强度测定仪:塑料表观密度测试仪
-
普通磨料堆积密度仪
-
落球回弹试验仪,介电击穿强度测定仪:白土堆积密度测定仪
-
氧化铝流动时间测定仪
-
落球回弹试验仪,介电击穿强度测定仪:压实密度粉末电阻率仪
-
陶粒砂体积密度测定仪
-
氧化铝松装密度测定仪
-
表面活性剂表观密度仪
-
自由流动堆积密度测定仪
-
落球回弹试验仪,介电击穿强度测定仪:超硬材料堆积密度测定仪
-
霍尔流速计
- 比表面测试仪
- 电池检测
- 燃烧性能试验机
- 金属检测仪器
-
焙烧炉试验机
ASTMD495耐高压低电流电弧放电试验机
高相电压小交流电疲劳冲击试验仪(耐电孤疲劳冲击试验仪)-(算起机掌控)
High voltage low current tester (arc resistance tester) - (computer control)
设备名号:耐电弧试验机
Product name: electric arc resistance tester
企业产品款型:NDH-A
Product model: NDH - A
充分满足标准规范:GB/T 1411-2002《粉末状隔热材质耐高压得过低直流电电孤充放电的实验室检测》(就是指IEC 61621-1997)及ASTM D495等标准化的追求设计制作打造的,并符合标准IEC 149、UL
Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc
一 概述
一An overview of the
一般采用使用范围及作用:
本现场实验机是采用采使用在电动机、电和家庭装电等业内的技工用可金属、不饱和环氧树脂胶和隔绝漆等隔绝相关用料的耐焊弧耐腐蚀性综合评价,主使用在固态隔绝相关用料如:可金属、胶片、不饱和环氧树脂、矿石、瓷器、窗玻璃、隔绝油、隔绝漆、瓦楞纸等导电介质的耐焊弧耐腐蚀性测试软件;
本实践英文机由统计机管控正常运作,就可以提示目前实践英文动态及实践英文时光,实践英文结束了之后并保管目前实践英文统计资料,并可复印.原则科学试验评估报告。
Main scope of application and features:
This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;
This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report
二 功能特点
1 超声波焊接机为内外内置式组成部分,下方为使用体统,顶部为冲击湿热。
2 本产品设备用到*新智慧管理技术性,按照选购子程序(IEC或ASTM)可手动来进行试验检测,并在PC上彰显检验流程和报告单。
3 **性能参数优异,抗侵扰业务能力强,检测定位精更高。
二:Functional features:
1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.
2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.
3 good safety performance, strong anti-interference ability, high test precision.
三 主要技术参数
1 电孤通断日期数据误差:超过 ±10ms
2 调压器体积:2kVA
3 稳定实验设计相电压:12.5kV
4 疲劳试验额定电压导致精度:±3%
5 电压电流管理高精度:±10% 电压电流量测控制精度:1.5%
6 电极材料对样品心理压力:(0.5±0.05)N
7 参比电极物料:钨棒
8 电级距:(6.35±0.1)mm(IEC)
(6.0±0.1)mm(ASTM)
9 选用区域环境平均温度:(23±2)℃
10 适用工作环境绝对湿度:(50±5)%
11 外接电源:220V±5% 50Hz
12 校正 办法: 国际标准/美标/10 mA 连续不断/20 mA 连续式/30 mA多次/40 mA不断
13 现场实验步骤下述:
| 应用程序段 | 脉冲电流量 mA | 焊弧通断时候s | 各编译程序段延续用时s | 疲劳试验总时长s | |
| | | IEC 61621 | ASTM D495 | | |
| 1 | 10 | 1/8s通 7/8s断 | 1/4s通 7/4s断 | 60 | 60 |
| 2 | 10 | 1/4s通 3/4s断 | 1/4s通 3/4s断 | 60 | 120 |
| 3 | 10 | 1/4s通 1/4s断 | 1/4s通 1/4s断 | 60 | 180 |
| 4 | 10 | 不断通 | 60 | 240 | |
| 5 | 20 | 连续式通 | 60 | 300 | |
| 6 | 30 | 多次通 | 60 | 360 | |
| 7 | 40 | 连续不断通 | 60 | 420 | |
Three main technical parameters:
Error: 1 arc on-off time less than plus or minus 10 ms
Transformer capacity: 2 kva
3 test voltage rating: 12.5 kV
4: test voltage accuracy + / - 3%
5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%
6 electrode pressure on sample: (0.5 + 0.5) N
7 electrode materials: tungsten rods
8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)
9 using the environment temperature (23 + 2) ℃
10 use environment humidity: (50 + 5) %
Power supply: 220 v + 5% for 50 hz 10 a
Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous
13 test procedure is as follows:
Procedures section of the arc current
MA arc on-off time s the program s test total duration time s
IEC 61621 ASTM D495
1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s
2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s
3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s
4 consecutive 10 to 60, 240
5 20 consecutive 60, 300
30 consecutive 6 to 60, 360
7 consecutive 40 to 60, 420
四 配置
| 号码 | 名字 | 人数 | 备注栏 |
| 01 | 耐弧光试验仪 | 1台 | |
| 02 | 工业软件系统 | 每套 | |
| 03 | 参比电极支架 | 几套 | |
| 04 | 电原拖链电缆 | 一系列 | |
| 05 | 地线放** | 1支 | |
| 06 | 电压电流毫安表 | 每台 | |
| 07 | 台式电脑测控电脑软件 | 一整套 | |
| 08 | 坯料架 | 一根 | |
| 09 | 探针多远标准规定块 | 2块 | |
| 10 | 弯度条件块 | 2块 | |
| 11 | 淘瓷片 | 2片 | |
| 12 | 喷墨打印出机 | 1台 | 加盟品牌 |
| 13 | 计算方法机 | 1台 | 企业品牌 |
| 14 | 食用反映书 | 1份 | |
| 15 | 达标率证 | 1份 | |
Four configuration:
Serial number name number note
01 arc resistance tester
02 a electrode system
03 electrode bearing a set
04 a set of power cable
05 ground put a rod
06 milliammeter current one
7 a set of computer measurement and control software
08 specimen holder a
09 electrode distance standard 2 blocks
Standard 2 blocks of 10 Angle
11 ceramic pieces 2 pieces
12 one brand inkjet printer
13 1 computer brand
14 1 instruction manual
15 1 certificate
五 护肤品款型:
NDH-A 耐焊弧实验仪-微机把握
NDH-B 耐弧光测试仪-触摸式屏把控
Five product model:
NDH - A arc resistance tester - microcomputer control
NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询!